GAS 1.2 Bar Coolant Cap
- Logo Option Explained
- Customer Reviews (4)
Please use the "Applications" tab to verify that our cap fits your BMW.
Catastrophic cooling system failures are a fairly common problem on BMW vehicles. The problem is related to the cooling system maximum relief pressure that BMW has chosen to run, coupled with an almost entirely plastic set of cooling system components.
Most BMW vehicles manufactured between 1982 and 2006 run a cooling system vent pressure of 2.0 bar (29 psi). The problem is that the cooling system components are barely rated to handle that pressure when brand new. As the plastic parts heat cycle hundreds of times while exposed to the degrading effects of heat and coolant, they lose some of their strength. The result can be a ruptured part somewhere in the cooling system.
As you can see from the picture gallery, ruptures can occur in the radiator tanks, expansion tank, thermostat housing and coolant hoses. Not only can a failure leave you stranded somewhere that you would rather not be stranded, but these engines are very prone to cylinder head warping and cracking when severely over heated. The number one cause of very expensive cylinder head failures is severe over heating during a cooling system failure.
So what is the solution? The system does not need to vent at that high of a pressure. In fact the industry standard for cooling system vent pressure is 1.0 to 1.4 bar. After doing extensive research and beta testing on several BMW engines, we decided on an optimum pressure of 1.2 bar. This pressure is high enough to maintain OEM pressure specifications up to 126 degrees Celsius (260F), which means that our cap will not alter your cooling system efficiency in any way. Apparently even BMW has seen the light, since most current BMW models now come equipped with a 1.2 bar cap.
This German Auto Solutions cap will limit the maximum internal coolant pressure to 1.2 bar (17.5 psi) instead of the OEM spec of 2.0 bar (29 psi). Even something as simple as overfilling the coolant recovery tank a little higher than the recommended level will result in potentially damaging pressures when using the stock 2.0 bar cap.
We want to be very clear... cooling system components can fail due to cracking even at normal operating temperatures and pressures. Our cap will not guarantee you will never experience a cooling system component failure, but it will drastically reduce the chances of catastrophic ruptures.
The German Auto Solutions 1.2 bar Cooling System Cap uses 100% original BMW internal components that have been recalibrated to vent at 1.2 bar. This top of the line coolant cap is CNC machined from 6061 aluminum alloy, color anodized to prevent corrosion and enhance beauty, then laser etched with the caps specification and the German Auto Solutions name. This cap is not just an inexpensive solution to a potentially very inconvenient and very expensive failure, but is a very nice dress up item as well. The pictures shown on the left really do not do these caps justice, they truly are beautiful to look at. German Auto Solutions will soon be offering matching billet oil filler, power steering filler and oil filter caps for those who would like a complete set of high quality engine bay dress-up items.
If your BMW is more than 5 years old it's a good idea to replace the cooling system cap as part of a regular cooling system maintenance routine. Why take a chance with your expensive BMW cooling system by using the OEM 2.0 bar cap. Get your German Auto Solutions 1.2 bar replacement cap today.
The German Auto Solutions 1.2 bar Coolant Cap has been on the market now for over five years with thousands of caps sold worldwide. We have caps in Texas, Arizona, the Middle East and many other extremely hot climates, and to date, we are not aware of a single rupture of a cooling system using our cap.
The German Auto Solutions 1.2 bar coolant cap fits many BMW models manufactured from 1982 to present. Use the application list tab above to verify fitment for your vehicle.
|Related BMW Part Numbers|
4 Reviews for GAS 1.2 Bar Coolant Cap
I see why there's an option. - Sunday, December 27, 2020The GERMAN AUTO SOLUTIONS logo doesn't line up, it faces almost completely the wrong direction. This is obviously why there's an option to purchase the cap without the logo. I wish I had known that. Other than that it seems to work fine.
G.A.S. Response - Thank you for your feedback. We have sold thousands of these without complaints about the logo but you do bring up a valid point. The cap fits dozens of different BMW and aftermarket coolant tanks and the logo only indexes properly on some of them. I will add an "Options Description" tab on the product page to explain this to hopefully prevent any disappointment about indexing in the future.
Works great! 2005 m54 x5 - Wednesday, August 5, 2020Installed on my 2005 x5 a few years back and zero issues. Ordering one for the 540 right now!
Heavily but tastefully modded & still N/A 540i 02 - Tuesday, June 9, 2020I've been running this cap for some time now and I'm very pleased! After I addressed my aux fan (over looked after so long of it not being an issue) it was smooth sailing. This is from someone who believes in few red lines a day (my daily, still, for now). Can't beat that look in the bay either! Haven't seen a better cap around & I sure ain't looking.
Great looking Cap - Sunday, July 14, 2019Really beautiful cap and very well made. Added piece of mind that I'm protecting my cooling system from failure.